PIONEER MACHINERY
Taiwan Headquarters
9 Minzu St., Tucheng Dist., New Taipei City 23679, Taiwan
Tel
+886 2 2268 1188
Email
info@pioneerm.com
IoT Service
iotservice@pioneerm.com
Office Hours
Monday–Friday: 08:00–17:00
Electric Continuous Annealer for Thick Cu Wires
- Copper continuous annealer process made by applying a high current onto the wire on its path through 4 contact wheels (450 mm diameter each one). These wheels are internally water cooled with heat exchanger control.
- This unit is driven by the motor of the last capstan of the drawing machine but it can optionally be driven by an independent motor.
- Available in vertical design for lower currents and horizontal design for higher currents and also to facilitate the threading operations.
- Annealers are proposed using AC or DC variable voltage, assuring the correct heating of the wires according to the line speed.
- HMI+PLC computer control is integrated in order to guarantee a zero hard copper starting and keeps a smooth and constant wire elongation during the whole range of drawing speeds and wire diameters.
| AC-3500-V | AC-4500-H/V | AC-6000-H | AC-8000-H | |
| Contact pulley [mm] | 450 | 450 | 450 | 450 |
| Wire range [mm] | 1 – 2.5 | 1 – 3.5 | 1 – 4.5 | 1 – 4.5 |
| Annealing speed [m/s] | 30 – 18 | 35 – 8 | 35 – 5 | 35 – 8 |
| Wire elongation | 33% +/-1% | 33% +/-1% | 33% +/-1% | 33% +/-1% |
| Output voltage [V] | 5 – 50 | 5 – 60 | 5 – 60 | 5 – 60 |
| Annealing current [A] | 3500 | 4500 | 6000 | 8000 |