•      Double twist stranding machine suitable for stranding and compaction of all 7 wires formations, 19 wires "unilay" as well as

•      laying up of 2 / 3 / 4 cores of insulated conductors

•      Carbon fiber bows with exchangeable sliding steel band allowing high rotating speeds with heavy loads

•      Underground hydraulic lifter platform allowing an easy loading / unloading operation

•      HMI+PLC control system for pre-setting stranding pitch, twist direction and speed synchronization

•      Tubular type stranding machine working with 100% back twist movement. Suitable for 7, 12 or 19 sector shape cables of

•      copper, aluminum as well as for steel wires

•      Encircling roller bearings being permanently lubricated by a high pressure oil injection made by a circulating system equipped

•      with an oil pump and oil tank

•      Wire tension control is done through band type brakes or by hysteresis brakes (Optional)

•      Main motor, pulling capstan and take up units are independently driven by AC servo motors

•      HMI+PLC control system for pre-setting stranding pitch, twist direction, automatic tension compensation control and speed

•      synchronization with the take up unit

•      Rigid type stranding machine working without back twist movement. Each cage is equipped with a multi-bobbin auto-loading carrier

•      This machine series is designed to work with round, straight sector or prespiral sector cables of 19 / 37 / 61 / 91 copper and aluminum

•      conductors as well as for armouring insulated cables with galvanized steel wires

•      Wire tension control is made by pneumatic disk brakes. Alternatively when using the machine for laying up control cables we can apply

•      hysteresis brakes

•      The transmission of the cages can be done by one single DC motor connected to the cages through a counter shaft or optionally can

•      be run with multi motored drives, having each cage its own AC servomotor

•      The machine is provided with HMI+PLC control system for pre-setting stranding pitch, twist direction, automatic tension compensation

•      control, and for speed synchronization with the pulling capstan and take up unit

•      Rigid type stranding machine working without back twist movement and equipped with a multi-bobbin auto-loading carrier

•      This machine series is designed for armouring cables with 48 / 72 / 84 / 88 / 96 galvanized steel wires as well as for screening

•      high voltage power cables with copper wires

•      Wire tension control done through hysteresis brakes installed on each pay off

•      The machine is provided with HMI+PLC control system for pre-setting stranding pitch, twist direction, automatic tension compensation

•      control, and for speed synchronization with the pulling capstan and the take up unit

•      High speed bow type skip stranding machine working with 100% back twist movement. Designed to work with 7 rounds and

•      compact copper or aluminum conductors

•      Steel plate rotating bows

•      Wire tension control is done through band type brakes or by hysteresis brakes (Optional)

•      Main rotor, pulling capstan and take up unit are driven independently by AC servo motors

•      HMI+PLC control system for pre-setting stranding pitch, twist direction, automatic tension compensation control and speed

•      synchronization with the take up unit